H8 Leader

H-8 LEADER

8mm Camera

1947

  • OVERALL DIMENSIONS: 8 1/2" x 6" x 3"
  • WEIGHT: Approximately 5 1/2 lbs
  • OUTER CASE: Highly polished duraluminium body, covered in genuine Morocco leather. Metal parts are chrome-plated.
  • FILM CAPACITY: 100ft (30m), 50ft (15m) and 25ft daylight loading spools of double run 8mm film. When a roll runs through the camera, only half the width of film is exposed. The spool is then reversed and run through again, exposing the other half. When processed, film is split and spliced together giving twice the amount for projection.
  • THREADING: Automatic threading and loop forming. The end of the film is simply placed in a channel leading to the feed sprocket. The release is pressed and the film is then automatically threaded throughout the entire mechanism.
  • MOTOR: Constant speed, spring motor mechanism; governor controlled. Large winding handle folds downward and attaches to camera when not in use. Spring cannot be over-wound. 8:1 external drive shaft permits the attachment of an electric motor.
  • TURRET: Rotating turret accommodates three interchangeable D mount lenses. The top position allows for critical focusing through a magnified groundglass screen.
  • VIEWFINDER: Tri Focal viewfinder gives an exact viewing field for lenses of 3 focal lengths. A cupped eyepiece allows for critical focusing through a groundglass screen.
  • VARIABLE SPEED: 8, 16, 24, 32 and 64 frames per second
  • Internal Frame Counter RELEASE BUTTON: provides for the making of continuous exposures by a finger-tip release on the front of the camera. A side release allows for locked, hands-free running or single frame exposures.
  • SHUTTER: 190 degree aperture shutter
  • FOOTAGE COUNTER: adds and subtracts accurately in forward or reverse motion and automatically returns to zero when film is reloaded into the camera.
  • AUDIBLE FOOTAGE INDICATOR: A distinct click announces the passing of each 10 inches of film through the gate. This mechanism may be disengaged, if desired, by simply moving a lever.
  • FRAME COUNTER: Twin dial counts frames individually and in total; Adds frames in forward motion and subtracts when film is wound backwards. Dial may be reset manually at any time.
  • SINGLE FRAME: Time lapse and animation is possible by using the side release button or an accessory cable release and adapter; I-T lever allows for timed or instantaneous single exposures.
  • MANUAL REWIND: Clutch disengages spring motor and permits forward movement and backwind without running down the spring; allows for dissolves and superimposition.
  • TRIPOD SOCKET: 3/8" thread

Notes and Comments

A built-in frame counter was added to all H model cameras after serial number 33200. [1] The H-8 "Leader" was sold with a trifocal viewfinder (inscribed with a serial number identical to the camera body) and a cupped eyepiece used for critical focusing. Other changes include the removal of the key wind slot and the addition of a film plane mark on the right side of the camera body.

See the next page for a description of the term Leader.

Bolex cameras in the H8 non-reflex series:

H-8, H-8 Leader, H-8 Standard, H-8 Deluxe, H-8 T and H-8 S.


Serial Numbers and Dates of Manufacture

The serial numbers listed below apply to all H16/H8 cameras manufactured after the introduction of the built-in frame counter, up until 1958 (with the introduction of the non-reflex H8T.) The serial number on this model can be found on several locations: inside the film chamber, near the top spindle, or behind the turret plate near the bottom lens position. A matching number can sometimes be found inside the film chamber door.

Bolex H8 Leader :: Serial Numbers
  #   Year
33200 40000 1946 / 47
40000 50000 1948
50000 55000 1949
55000 60000 1950
60000 70000 1951
70000 85000 1952
85000 95000 1953
95000 105000 1954
105000 120000 1955
120000 130000 1956
130000 150000 1957
150000 158000 1958

1 "Maintenance and Repair of the Bolex H Camera", Paillard Ltd., 16-H-10.55.